PRECISION MEASURING TOOLS

A variety of measuring tools
for accurate work.
  • ''Good products and quality.'' Brandon S., CO
  • ''Excellent product and top of the line.'' Chris S., FL
  • ''The best!'' Vladimir G., IL
  • ''Best I've ever used.'' Andrew M., AL
  • ''Best you can buy! Period!'' William M., AZ
  • ''I like the tools for the exactitude.'' Alfredo G., CA
  • ''Nicely constructed.'' Jeff K., IL
  • ''Nice!!'' David S., AL
  • ''Nice!'' Scott C., MN
  • ''Nice stuff!!'' Robert B., NY
  • ''Nice product.'' Jay H., MN
  • ''Excellent!'' Lachian J., AL
  • ''I like them.'' Mike B., NV
  • ''Excellent products. Have had and used for past 5 years and not a complaint!'' Erik R., NH
  • ''I prefer Empire over most other brands. Good quality, good price.'' Kyle K., NY
  • ''Excellent Products.'' Jason R., IN
  • ''I love your products, very well built and made to hold up on the job - a quality that is becoming more and more rare these days. Thank You!'' Chris R., OK
  • ''Excellent Product. Great Color.'' Margaret A., MA
  • ''I love them. I use them every day and I know that I can trust and rely on them daily.'' Roger M., PA
  • ''The best.'' Roger M., UT
  • ''The best.'' David J., MS
  • ''I love em!!'' Joshua S., OH
  • ''So far, i am really impressed with your product.'' Tony P., AL
  • ''Excellent quality very user friendly.'' Dave C., MA
  • ''I was sold on the warranty.'' Karl S., MI
  • ''I think this is an excellent product.'' Joshua P., MS
  • ''Fantastic.'' Milan J., UT
  • ''I really like your product. I hope it exceeds my expectations.'' James H., OK
  • ''Fantastic.'' William F., FL
  • ''Impressive quality and guarantee; will purchase Empire products in preference to Stabila in the future. Since purchased Empire adjustable square.'' Ronald G., AL
  • ''Great product!'' Mike D., IL
  • ''Very nice product... Good to see that some of it is assembled in the USA.'' Frank D., VA
  • ''Great product, love using it.'' Robert H., VT
  • ''It's great!!'' Chance H., PA
  • ''Great product and made in USA!!!!'' Joseph A., NY
  • ''Very nice product.'' Sean A., NJ
  • ''Great products!'' Brian S., AL
  • ''Very good quality products.'' Isaac D., AL
  • ''Great product.'' Dan S., TX
  • ''Very good product - well made.'' Merwyn M., OR
  • ''Great product!'' Mike V., NE
  • ''Very nice quality and reliabilty.'' Gary A., MD
  • ''Keep up the quality products.'' Marlon L., OR
  • ''Your products are absolutely outstanding. I will never use another speed square or level made by another company, your quality is on an entirely different level.'' Jeff T., CT
  • ''Have 2 squares and now a level. All of your products have proved to meet my needs, plus. I will always purchase your items. Thanks!'' Ben S., IL
  • ''Keep up the great products. Keep making them stand out from the others.'' Steve M., KS
  • ''Your product is great! it is always very acurate and it just flat out looks cool. I am very happy with it as I always have used your levels. I have 5 of them!'' William T., MA
  • ''Keep em coming!'' Zach B., AL
  • ''Great reliable products, no complaints.'' Kenneth O., IL
  • ''Just want to say thanks for creating great durable tools.'' Jason S., IN
  • ''Great quality.'' Ian P., AL
  • ''I've worked construction and landscape projects for 30 years and have always used your products for leveling and squaring, they have always done the job well.'' Douglas I., NY
  • ''Great products, easy to read.'' Gerald K., IL
  • ''I've owned Empire products for about 25 years. They get abused often and are still woking just fine.'' Andrew B., NY
  • ''Have one that's been around 4 years and running.'' Jason W., CA
  • ''Love them.'' Johnathan W., TX
  • ''Appears to be an excellent product.'' Jason L., SK, Canada
  • ''Love the range of all your tools.'' Chris B., AL
  • ''Love it!'' Billy G., AL
  • ''Nice level.'' Jack C., MT
  • ''Best looking in it's class.'' Charles W., CA
  • ''Nice design.'' John P., OH

2730 6'' POCKET RULER

2730 6'' POCKET RULER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Stainless steel
• 32nds, mm markings, dec. equivalents

27302 6'' STIFF RULER

27302 6'' STIFF RULER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Stainless steel • 32nds and millimeters on front, conversion table on the back
• Permanent and accurate photo-engravings/electrolytical etchings
• Sub zero feature allows 32nds and 64ths readings from right to left below the "0" mark

27303 6'' STIFF RULER

27303 6'' STIFF RULER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Stainless steel
• 100ths, 64ths, 32nds, 16ths, 10ths, mm

27308 12'' HOOK RULER

27308 12'' HOOK RULER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 32nds, mm, cm

27318 18'' STAINLESS STEEL RULER

27318 18'' Stainless Steel Ruler

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 8ths, 16ths, mm

27511 26 LEAF FEELER GAUGES
27512 26 METRIC LEAF FEELER GAUGES

LEAF FEELER GAUGES

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Leafs from .002 to .025 w/mm equiv. & 2'' scale, .038mm - .098mm for metric
• Used individually or combined for precise measurement of gaps
• Chrome plated with knurled nut to lock in place
• Meets Fed. Specs #GGG-G-17C for tolerance

2755 DRILL GAUGE

2755 DRILL GAUGE

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 29 fractional drills 1/16'' to 1/2'' by 64ths
• Made of tempered steel 6-1/2'' long
• Reads in fractions with decimal equivalents
• Easy to read white markings on black finish, stamped letters on reverse side

27551 CONVERSION TABLE

27551 CONVERSION TABLE

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Slide rule conversion 7'' long
• Converts inch/mm, ga./liter, pounds/kg.,Fahrenheit/celsius, feet/meters, yards/meters
• Extensive equivalents, formulas, fraction/decimal/metric equivalent chart

2760 SCREW ID GAUGE

2760 SCREW ID GAUGE

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• SAE standards - #1 to 5/16''
• Tempered steel 5/64'' thick, 5-1/8'' long
• Used to identify size of screws, bolts, rivets, wires, pins with length,
  diameter, wire size, screw pitch, and clearance drill size

2780 1'' MICROMETER

2780 1'' MICROMETER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Diecast metal frame, 5'' long
• 1'' capacity by .0005''
• Ratchet stop and spindle lockout to hold measurement
• Adjustable realignment to ''0''

2783 BRASS POCKET CALIPER

2783 BRASS POCKET CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Brass body and slide, 4-7/8'' long
• 4''/80mm capacity by 32nds and mm
• Reads inside and outside measurements

2784 VERNIER CALIPER

2784 VERNIER CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 4-3/4''/120mm capacity by 1/6''/1/10mm
• 7-1/8'' long steel body
• Friction stop roller and thumb screw lockout
• 3 way measuring- inside, outside, depth

2785 METRIC DIAL CALIPER

2785 METRIC DIAL CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 3 way measuring- inside, outside, depth
• Bezel realignment to ''0''
• Reinforced nylon construction

2786 6'' DIAL CALIPER MEASUREMENT BY .001

2786 6'' DIAL CALIPER MEASUREMENT BY .001

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Direct dial reading in inches and mm
• 4 way measuring- inside, outside, depth, and step
• Adjustable bezel realignment to ''0''
• Fiberglass reinforced nylon with milled jaws for precision. 8-3/4'' long
• Thumb lockout holds measurement

2787 6'' DIAL CALIPER MEASUREMENT BY .01 AND 64THS

2787 6'' DIAL CALIPER MEASUREMENT BY .01 AND 64THS

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Direct dial reading in inches and mm
• 4 way measuring- inside, outside, depth, and step
• Adjustable bezel realignment to ''0''
• Fiberglass reinforced nylon with milled jaws for precision. 8-3/4'' long
• Thumb lockout holds measurement

2789 6'' DIGITAL ELECTRONIC CALIPER

2789 6'' DIGITAL ELECTRONIC CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Hardened stainless steel with satin chrome finish. 9-1/8'' long
• Accurate to .0005/.25mm
• 3 way measuring- inside, outside, depth
• LCD display with automatic power off
• SPC interface #RS232
• Uses #37891 (SR44W) replacement battery

2791 PROTRACTOR/ANGLE FINDER

2791 PROTRACTOR/ANGLE FINDER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 6'' long, high strength plastic with brass hardware
• Measure/transfer inside/outside sloped angles
• Use for miter angle layout
• The finest multi-purpose protractor on the mark

27912 STAINLESS STEEL PROTRACTOR

27912 STAINLESS STEEL PROTRACTOR

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• 6'' stainless steel arm, square head
• 0-180° measurements
• Use to measure and transfer angles

27913 DEPTH AND ANGLE FINDER GAUGE

27913 DEPTH AND ANGLE FINDER GAUGE

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Use for making precise depth measurements in small holes and slots
• Spring tension nut secures the rule at 90° to the base
• Angles of 30°, 45°, and 60° are etched on backside

2792 6 '' DIVIDER

2792 6 '' DIVIDER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

2793 6'' INSIDE CALIPER

2793 6'' INSIDE CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

2794 6'' OUTSIDE CALIPER

2794 6'' OUTSIDE CALIPER

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

10304 ROUTER AND SAW DEPTH GAUGE SET

10304 ROUTER AND SAW DEPTH GAUGE SET

Find a RetailerFIND A RETAILER DownloadDOWNLOAD

• Use for setting cutting depth of router bit, table saw or circular saw blade
• Solid aluminum gauges will not rust
• Deep stamped numbers and graduations
  • SOUL OF A BUILDER SINCE 1919
    • 1919
    • 1922
      1922
      Adjustable level
      invented by Empire
    • 1935
      1935
      First torpedo level
    • 1956
      1956
      Empire introduces
      Extruded Aluminum levels
    • 1965
      1965
      Empire invents the
      Magnetic level
    • 1967
      1967
      Mono Vial
      revolutionizes
      the industry
    • 1978
      1978
      Empire develops
      Polycast® levels
    • 1994
      1994
      Titan Box level
      is introduced
    • 2004
      2004
      Empire introduces
      True Blue®
    • 2005
      2005
      e70 is
      introduced
    • 2006
      2006
      em71 is
      introduced
    • 2007
      2007
      e50 is
      introduced
    • 2009
      2009
      True Blue® e100
      is introduced
    • 2013
      2013
      True Blue® Second Generation e2G Introduced